1 Scope
This standard specifies the terms and definitions, testing and test report for the test method of the air permeability, watertightness and wind load resistance performance for curtain walls.
This standard is applicable to the testing of the air permeability, watertightness and wind load resistance performance of curtain walls. The testing objects are confined to the curtain wall specimens and are not involved with the joints between the curtain wall and other structures.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
3.1 Air Permeability Performance
3.2 Watertightness Performance
3.3 Wind Load Resistance Performance
4 Testing
4.1 Air Permeability Performance
4.2 Watertightness Performance
4.3 Wind Load Resistance Performance
5 Test Report
Appendix A (Informative) Maximum Allowable Relative Frontal Deflection f0 of the Primary Members of Curtain Wall Specimen Under the Action of Wind Load Characteristic Value
Appendix B (Informative) Examples for the Displacemeter Arrangement of Typical Curtain Walls
Appendix C (Informative) Test Report of Air Permeability, Watertightness, Wind Load Resistance Performance for Curtain Walls
