标准编号:	GB/T 14594-2014
中文名称:	电真空器件用无氧铜板和带
英文名称:	Oxygen-free copper sheets and strips for vacuum electron devices
中标分类:	H62    重金属及其合金
行业分类:	GB    国家标准
ICS分类:	77.150.30 77.150.30    铜产品 77.150.30
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:	2014-12-05
实施日期:	2015-5-1
标准状态:	现行
替代旧标准:	GB/T 14594-2005 无氧铜板和带
翻译语言:	英文
文件格式:	PDF
中文字符数:	10000 字
翻译价格(元):	600.00 元
交付时间:	付款后 1 个工作日

Oxygen-free copper sheets and strips for vacuum electron devices



1 Scope



This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage and quality certificate, and order (or contract) contents of oxygen-free copper sheets and strips.



This standard is applicable to oxygen-free copper sheets and strips for vacuum electron devices in electronic industry sector.



2 Normative references



The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.



GB/T 228.1-2010 Metallic materials - Tensile testing - Part 1: Method of test at room temperature

GB/T 232 Metallic materials - Bend test

GB/T 351 Metallic materials - Resistivity measurement method

GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1: Test method

GB/T 5121 (All parts) Methods for chemical analysis of copper and copper alloys

GB/T 5231 Designation and chemical composition of wrought copper and copper alloys

GB/T 8888 Wrought heavy non-ferrous metal products - Packing, marking, transporting and storing

GB/T 23606 Copper-hydrogen embrittlement test method

GB/T 26303.3 Measuring methods for dimensions and shapes of wrought copper and copper alloys - Part 3: Sheets and strips

YS/T 335-2009 Metallographic determination methods of oxygen content in oxygen-free copper

YS/T 347 Copper and copper alloys - Estimation of average grain size

YS/T 478 The method for electrical conductivity measurement of copper and copper alloys by use of eddy current

YS/T 482 Methods for analysis of copper and copper alloys - The atomic emission spectrometry

YS/T 668 The sampling method of physical and chemical testing for copper and copper alloys

YS/T 815 Preparation method of test pieces for mechanical and technological properties of copper and copper alloys



3 Requirements



3.1 Product classification



3.1.1 Designation, temper and specification



The designation, temper and specification of sheets and strip shall be in accordance with those specified in Table 1.

Foreword i
1 Scope
2 Normative references
3 Requirements
4 Test methods
5 Inspection rules
6 Marking, packaging, transportation, storage and quality certificate
7 Order (or contract) contents