1 Scope
This Standard specifies the sectional dimension, effective length and permissible deviation, ride-out, variable center distance dimension measurement method and belt pulley dimension of automotive V-belt (hereinafter referred to as V-belt).
This standard is applicable to belts and pulleys used for driving auxiliaries of internal combustion engines for the automotive industry.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative documents referred to applies.
GB/T 13490 V-belts — Uniformity of Belts — Test Method for Determination of Centre Distance Variation (GB/T 13490-2006, ISO 9608:1994, IDT)
GB/T 17516.1 Belt Drives — Dynamic Test to Determine Pitch Zone Location — Part 1: V-beltsV (GB/T 17556.1-1998, idt ISO 8370:1993)
ISO 1081 Belt drives — V-belts and V-ribbed Belts, and Corresponding Grooved Pulleys — Vocabulary
