标准编号:	GB/T 119.2-2000
中文名称:	圆柱销 淬硬钢和马氏体不锈钢
英文名称:	Parallel Pins, of Hardened Steel and Martensitic Stainless Steel
中标分类:	J13    紧固件
行业分类:	GB    国家标准
发布机构:	国家质量技术监督局
发布日期:	2000-09-02
实施日期:	1905-6-22
标准状态:	valid
替代旧标准:	GB/T 119-1986
翻译语言:	英文
文件格式:	PDF
中文字符数:	3000 字
翻译价格(元):	100.0
交付时间:	付款后 1 个工作日

1 Scope This standard specifies parallel pins with nominal diameter d=1-20 mm, tolerance is m6, material is steel: Grade A (ordinary quenching) and Grade B (surface hardening) as well as of martensitic stainless steel. 2 Normative references The following normative documents contain provision which, through reference in this text, constitute provisions of this national standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. GB/T 90-1985 Acceptance Inspection, Marking and Packing of Fasteners (eqv ISO 3269: 1984) GB/T 1237-2000 Designation System for Fasteners (eqv ISO 8991: 1986) GB/T 3098.6-2000 Mechanical Properties of Corrosion-resistant Stainless-steel Fasteners-Part 1: Bolts, Screws and Studs (idt ISO 3506-1: 1997) GB/T 5267-1985 Electroplated Coatings on Threaded Fasteners GB/T 11376-1997 Phosphate Conversion Coatings for Metals (eqv ISO 9717: 1990)