标准编号:	GB/T 119.1-2000
中文名称:	圆柱销 不淬硬钢和奥氏体不锈钢
英文名称:	Parallel Pins,of unhardened steel and austenitic stainless steel
中标分类:	J13    紧固件
行业分类:	GB    国家标准
ICS分类:	21.060.50 21.060.50    销、钉 21.060.50
发布机构:	国家质量技术监督局
发布日期:	2000-9-2
实施日期:	2001-2-1
标准状态:	valid
替代旧标准:	GB/T 119-1986 GB 119-1986 圆柱销
翻译语言:	英文
文件格式:	PDF
中文字符数:	4000 字
翻译价格(元):	50.0
交付时间:	付款后 1 个工作日

1 Scope This standard specifies the characteristics of parallel pins of unhardened steel and austenitic stainless steel, with nominal diameters d from 0.6 mm to 50 mm inclusive. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. When published, all the shown versions are valid. All the standards will be modified, and all parties using this standard shall discuss the possibility of using the latest version. GB/T 90-1985 Acceptance inspection, marking and packaging of fasteners (eqv ISO 3269:1984) GB/T 1237-2000 Designation system for fasteners (eqv ISO 8991:1986) GB/T 3098.6-2000 Mechanical properties of corrosion-resistant stainless-steel fasteners-Part 1:Bolts,screws and studs (idt ISO 3506-1:1997) GB/T 5267-1985 Electroplated coatings on threaded fasteners GB/T 11376-1997 Phosphate conversion coatings for metals (eqv ISO 9717:1990)