Article 1.0.1 The Code is designed to adjust the lightning protection designs to lightning protection measures adopted to buildings (including constructional work, the same as follows), to prevent or reduce casualties and losses of cultural relics and properties resulted from lightning hit buildings, and to live up to safety, state-of-art technologies and economic feasibility.
Article 1.0.2 The Code shall be applied to the lightening protection design of the newly-built buildings, but not to that of antenna towers, community antenna television (CATV) receiving systems, oilcans and chemical outdoor equipment.
Article 1.0.3 The design for building lightning protection shall be based on the strict survey of conditions including geography, geology, soil, weather and environment, of laws of lightning activities and characteristics of the target buildings and shall make a scrutiny into forms and installations of lightning protection devices.
Article 1.0.4 The design for building lightning protection shall comply with all provisions of the Code and shall meet provisions of current national related standards and codes as well.
Contents
Chapter I General Provisions
Chapter II Classification of Building Lightning Protection
Chapter III Lightning Protection Measures of Buildings
Section I General Provisions
Section II Lightning Measures for Lightning Protection Buildings
Section III Lightning Protection Measures for the Second Class Lighting Protecting Buildings
Section IV Lightning Protection Measures for the Third Class Lighting Protecting Buildings
Section V Other Lightning Protection Measures
Chapter IV Lightning Protection Devices
Section I Air-termination system
Section II Down-conductor system
Section III Earth-termination system
Chapter V Selection and Installation of Air-termination systems
Section I Air-termination system Selection
Section II Lightning Receiving Installation
Chapter 6 Protection against lightning electromagnetic impulse
Section I General Provisions
Section II Lightning Protection Zone (LPZ)
Section III Requirements on shielding, earthing and equipotential bonding
Section IV Requirements on surge protective device and others
Appendix A
Appendix B
Appendix C
Appendix D
Appendix E
Appendix F
Appendix G
Appendix H
Appendix I
