1 Application scope
This standard specifies the emission limits and monitoring requirements of water and air pollutants from secondary nonferrous metals (copper, aluminum, lead and zinc) industrial enterprises, as well as relevant provisions for implementation and supervision of this standard.
This standard is applicable to the management of water and air pollutant emission in secondary nonferrous metals (copper, aluminum, lead and zinc) industrial enterprises, as well as the environmental impact assessment, environmental protection facilities design, environmental protection acceptance after completion and the post-operational management of water and air pollutant emission.
If waste nonferrous metals are added to raw materials of primary nonferrous metal industrial enterprises, the corresponding emission standards for pollutants in primary nonferrous metal industry shall be implemented.
This standard is not applicable to the emission management of water and air pollutants in industrial enterprises such as primary nonferrous metal smelting and rolling processing; it is also not applicable to the emission management of water and air pollutants from non-typical processing and facilities affiliated to the secondary nonferrous metal industrial enterprises.
This standard is applicable to legal pollutant behavior. In addition to the implementation of this standard, the site selection of newly-set pollution sources and the management of pollution sources in special protection areas shall comply with the relevant provisions specified in laws, regulations and rules, such as Law of the People's Republic of China on Prevention and Control of Water Pollution, Law of the People’s Republic of China on the Prevention and Control of Atmospheric Pollution, Marine Environmental Protection Law of the People's Republic of China, Law of the People's Republic of China on Prevention and Control of Environmental Pollution by Solid Waste, Law of the People's Republic of China on Environmental Impact Assessment.
The water pollutant emission control requirements specified in this standard are applicable to the behavior of enterprises directly or indirectly discharging water pollutants outside their legal boundaries.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For undated references, the latest edition of the normative document applies.
GB 18871 Basic standards for protection against ionizing radiation and for the safety of radiation sources
GB/T 6920 Water quality—Determination of pH value—Glass electrode method
GB/T 7466 Water quality—Determination of total chromium
GB/T 7469 Water quality—Determination of the total mercury—Potassium permanganate-pootassium peralfate descomposed method—Dithizone spectrophotometric method
GB/T 7470 Water quality—Determination of lead—Spectrophotometric method with dithizone
GB/T 7471 Water quality—Determination of cadmium—Spectrophotometric method with dithizone
GB/T 7472 Water quality—Determination of zinc—Spectrophotometric method with dithizone
GB/T 7475 Water quality—Determination of copper, zinc, lead and cadmium—Atomic absorption spectrometry
GB/T 7485 Water quality—Determination of total arsenic—Silver diethyldithiocarbamate spectrophotometric method
GB/T 11893 Water quality—Determination of total phosphorus—Ammonium molybdate spectrophotometric method
GB/T 11901 Water quality—Determination of suspended substance—Gravimetric method
GB/T 11910 Water quality—Determination of nickel—Dimethylglyoxime spectrophotometric method
GB/T 11912 Water quality—Determination of nickel—Flame atomic absorption spectrometric method
GB/T 11914 Water quality—Determination of thechemical oxyyen demand—Dichromate method
GB/T 15264 Ambient air—Determination of lead—Flame atomic absorption spectrophotometric method
GB/T 16157 Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
GB/T 16489 Water quality—Determination of sulfide—Methylene blue spectrophotometric method
HJ 77.2 Ambient air and waste gas—Determination of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs)—Isotope dilution HRGC-HRMS
HJ 480 Ambient air—Determination of the fluoride—Method by filter sampling and fluorine ion-selective electrode analysis
HJ 481 Ambient air—Determination of the fluoride—Method by lime-paper sampling and fluorine ion-selective electrode analysis
HJ 485 Water quality-Determination of copper-Sodium diethydlthiocabamate spectrophotometric method
HJ 486 Water quality—Determination of copper—2,9-Dimethy-1,10-phenanthroline spectrophotometric method
HJ 493 Water quality sampling—Technical regulation of the preservation and handling of samples
HJ 494 Water quality—Guidance on sampling techniques
HJ 495 Water quality—Technical regulation on the design of sampling programmes
HJ 535 Water Quality—Determination of Ammonia Nitrogen—Nesslers Reagent Spectrophotometry
HJ 536 Water quality - Determination of ammonia nitrogen - Salicylic acid spectrophotometry
HJ 537 Water quality - Determination of ammonia nitrogen - Distillation-neutralization titration
HJ 540 Ambient air and waste gas - Determination of arsenic - Silver diethyldithiocarbamate spectrophotometric method (on trial)
HJ 544 Stationary source emission-Determination of sulfuric acid mist-Ion chromatography (on trial)
HJ 548 Stationary source emissions - Determination of hydrogen chloride - Silver nitrate titration method (on trial)
HJ 549 Ambient air and waste gas - Determination of hydrogen chloride - Ion chromatography (on trial)
HJ 597 Water quality—Determination of Total mercury—Cold atomic absorption spectrophotometry
HJ 629 Stationary source emission - Determination of sulphur dioxide - Non-dispersive infrared absorption method
HJ 636 Water quality - Determination of total nitrogen - Alkaline potassium persulfate digestion UV spectrophotometric method
HJ 637 Water quality - Determination of petroleum oils and animal and vegetable oils - Infrared spectrophotometry
HJ 657 Ambient air and stationary source emission - Determination of metals in ambient particulate matter – Inductively coupled plasma/mass spectrometry (ICP-MS)
HJ 665 Water quality - Determination of ammonium nitrogen by continuous flow analysis(CFA) and Salicylic acid spectrophotometry
HJ 666 Water quality - Determination of ammonium nitrogen by flow injection analysis (FIA) and Salicylic acid spectrophotometry
HJ 667 Water quality - Determination of total nitrogen by continuous flow analysis(CFA) and N-(1-naphthyl)ethylene diamine dihydrochloride
HJ 668 Water quality - Determination of total nitrogen by flow injection analysis(FIA)and N-(1-naphthyl)ethylene diamine dihydrochloride spectrophotometry
HJ 670 Water quality - Determination of orthophosphate and total phosphorus - Continuous flow analysis(CFA) and Ammonium molybdate spectrophotometry
HJ 671 Water quality - Determination of total phosphorus - Flow injection Analysis (FIA) and Ammonium molybdate spectrophotometry
HJ 675 Determination of nitrogen oxide emissions from stationary sources by acid-base titration method
HJ 685 Stationary source emission - Determination of lead - Flame atomic absorption
HJ 692 Determination of nitrogen oxides in waste gas from fixed pollution sources Non-dispersive infrared absorption method
HJ 693 Stationary source emission - Determination of nitrogen oxides - Fixed potential by electrolysis method
Foreword iv
1 Application scope
2 Normative references
3 Terms and definitions
4 Pollutant emission control requirements
5 Monitoring requirements for pollutants
6 Implementation and supervision