1 Scope
This standard specifies the terminologies and definitions, requirements, test methods, inspection rules, marking, storage, packaging and transportation and other requirements of non-combustible inorganic compound board.
This standard is applicable to non-combustible fiber reinforced cement board, non-combustible fiber reinforced calcium silicate board, glass fiber and magnesium cement board or other non-combustible fiber reinforced inorganic compound boards.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 5464 Non-combustibility Test Method of Building Materials (GB/T 5464-2010, ISO 1182:2002, Reaction to Fire Tests for Building Products - Non-combustibility Test, IDT)
GB/T 7019-1997 Test Methods for Fiber Cement Products (neq ISO 393-1:1983)
GB 8624 Classification for Burning Behavior of Building Materials and Products (GB 8624-2006, EN 13501-1:2002, MOD)
GB/T 14402 Reaction to Fire Tests for Building Materials and Products - Determination of the Heat of Combustion (GB/T 14402-2007, ISO 1716:2002, IDT)
3 Terminologies and Definitions
For the purposes of this standard, the following terminologies and definitions apply.
3.1
Non-combustible inorganic compound board
Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Storage and Transportation
