1 Scope
This standard specifies the terms and definitions, classification and identification, requirements, test methods, inspection rules, comprehensive judgment criteria, packaging, marking, storage and transportation of firestop material.
This standard is applicable to firestop materials or firestop subassembly used for various through holes/cavities and structural joints in buildings and structures as well as various facilities, excluding fire expansion seals used in construction fittings and firestops collar of PVC-U piping for building drainage.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 2408-2008 Plastics - Determination of Burning Characteristics - Horizontal and Vertical Test
GB/T 2611 General Requirements for Testing Machines
GB/T 5455 Textiles - Burning Behavior - Vertical Method
GB/T 7019-1997 Test Methods for Fiber Cement Products
GB/T 8333 Test Method for Flammability of Rigid Cellular Plastic - Vertical Burning Method
GB/T 9978.1 Fire-resistance Tests - Members of Building Construction - Part 1: General Requirements
GA 304-2001 Fire Stopping Collar of PVC-U Pipe for Building Drainage
3 Terms and Definitions
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Identification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Comprehensive Judgment Criteria
9 Packaging, Marking, Storage and Transportation
Appendix A (Normative) Installation of Standard Test Piece of Firestop Material for Fire Resistance Test
Appendix B (Informative) Application of Fire Resistance Test Results
