1 Scope
This standard specifies terms and definitions, classification, basic and additional requirements, marking and information to be supplied for safety footwear.
This standard is applicable to the safety footwear which may protect wearers against suffering from injuries on their feet and legs in the working area.
This standard is not applicable to the safety footwear without insole and insock or without insole but with movable insock.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute the provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents applies. For undated references, the latest edition of the normative document referred to applies.
GB/T 20991-2007 Personal Protective Equipment-Test Methods for Footwear (ISO 20344: 2004, MOD)
3 Terms and Definitions
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Basic Requirements for Safety Footwear
6 Additional Requirements for Safety Footwear
7 Marking
8 Information to be Supplied
Appendix A (Normative) Determination of Impact Resistance of Non-metallic Protective Toecaps After Temperature Treatment and Chemical Treatment
Appendix B (Normative) Determination of Penetration Resistance of Non-metallic Penetration-resistant Insert After Temperature Treatment and Chemical Treatment
Bibliography
