1 Scope
This Standard specifies the performance and measurement method for braking of motorcycles and mopeds.
This Standard is applicable to motorcycles and mopeds.
This Standard is not applicable to the mopeds with maximum design speed not exceeding 25km/h and the vehicles fitted for invalid drivers.
2 Normative References
The following normative documents contain provisions which, through reference in this Standard, constitute provisions of this Standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Tests
Appendix A (Normative) Braking Test and Performance
Appendix B (Normative) Requirements of Two-Wheeled Mopeds and Two-Wheeled Motorcycles Equipped with Anti-lock Devices
Appendix C (Normative) Determination of Adhesion Coefficient (K) and Adhesion Utilization Rate (ε)
