1 Subject Content and Application Scope
1.1 Subject content This standard specifies the access conditions of security landfill site for hazardous wastes, and the environmental protection requirements on selection, design, construction, operation, closing and monitoring of the landfill site.
1.2 Application scope
This standard is applicable to construction, operation, supervision and administration of landfill sites for hazardous wastes.
This standard is not applicable to the disposal of radioactive wastes.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard and are equivalent.
GB/T 14848 Quality Standard for Ground Water
GB 5085.1 Identification Standards for Hazardous Wastes - Identification for Corrosivity
GB 5085.3 Identification Standards for Hazardous Wastes-Identification for Extraction Toxicity
GB 5086.1~5086.2 Test Method Standards for Leaching Toxicity of Solid Wastes
GB 8978 Integrated Wastewater Discharge Standard
GB 12348 Standard of Noise at Boundary of Industrial Enterprises
GB/T 15555.1~15555.12 Determination for Leaching Toxicity of Solid Wastes
GB 16297 Integrated Emission Standards of Air Pollutants
GB 15562.2 Graphical Signs for Environmental Protection - Solid Waste Storage (Treatment) Site
Where the above standards are revised, the latest edition shall be applied.
3 Definitions
Foreword
1 Subject Content and Application Scope
2 Normative References
3 Definitions
4 Requirements for Landfill Site Selection
5 Requirements on Approach of Landfilled Mass
6 Environmental Protection Requirements for Design and Construction of Landfill Site
7 Operation and Management Requirements of Landfill Site
8 Pollution Control Requirements for Landfill Site
9 Site Closure Requirements
10 Monitoring Requirements
11 Supervision over and Implementation of this Standard
Appendix A (Normative) Diagram for Liner System
