1 Scope
This standard specifies the limits and measurement methods for exhaust pollution, crankcase pollution and evaporation pollution in normal and low temperatures from light-duty vehicles with positive ignition engines. It states the durability requirements for pollution control equipment and the technical requirements and measurement methods for OBD system.
This standard specifies the limits and measurement methods for exhaust pollution in normal temperature, the durability requirements for pollution control equipment and the technical requirements and measurement methods for OBD systems for light-duty vehicles with compression ignition engines.
This standard stipulates the requirements for type approval, production conformity and vehicle-in-service conformity check and diagnosis for light-duty vehicles.
This standard specifies the special requirements for LPG or NG light-duty vehicles.
In addition, this standard states the type approval process for pollutant emissions from catalysts that, as stand alone technology, are to be installed on light-duty vehicles as an alternative.
This standard is applicable for light-duty vehicles that use positive ignition or compression ignition engines with the maximum designed speed greater than or equal to 50km/h.
This standard is not applicable for vehicles categorised as N1 that have received type approval according to GB 17691 (III or IV).
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding any amendments) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Type Approval Application and Approval
5 Technical Requirements and Tests
6 Type Approval Extension
7 Production Conformity
8 Vehicle-in-service Conformity
9 Implementation of the Standards
Appendix A (Normative) Type Approval Application Material
Appendix B (Informative) Type Approval Certificate Format
Appendix C (Normative) Test of Emissions after the Cold Start in Normal Temperature (Test I)
Appendix D (Normative) Measuring CO, HC Values at Double Idle and Value at High Idle (Double Idle Test)
Appendix E (Normative) Test of Emissions from the Crankcase (Test III)
Appendix F (Normative) Test for the Emission of Evaporative Pollutants (Test IV)
Appendix G (Normative) The Durability Test of the Pollution Control Equipment (Test V)
Appendix H (Normative) CO and HC Emission Tests after a Cold Start at Low Temperature (Test VI)
Appendix I (Normative) On-Board Diagnostic System
Appendix J (Normative) Technical Requirements for Reference Fuel
Appendix K (Normative) Specific Requirements for LPG or NG Vehicles
Appendix L (Normative) Type Approval for Alternative Catalytic converter as a Stand Alone Technology
Appendix M (Normative) Requirements for Production Conformity
Appendix N (Normative) Vehicle-in-Service Conformity Check and Diagnosis
Appendix O (Informative) Bibliography
