This part defines the general requirements for safe access to machines mentioned in GB/T 15706.2 and gives advice about the correct choice of access means when the necessary access to the machine is not possible directly from the ground level or from a floor.
This part applies to all machinery (stationary and mobile) where fixed means of access are necessary.
This part applies to means of access which are a part of a machine.
This part may also apply to means of access to that part of the building (e.g. working platforms, walkways, ladders) where the machine is installed, providing the main function of that part of the building is to provide a means of access to the machine.
This part applies also to access means specific to the machine which are not permanently fixed to the machine and which may be removed or moved to the side for some operations of the machine (e.g. changing tools in a large press).
This part does not apply to lifts, to moveable elevating platforms or other devices specially designed to lift persons between two levels.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Significant Hazards
5 Requirements for the Selection of the Fixed Means of Access
5.1 General
5.2 Preferred Means of Access
5.3 Selection of the Means of Access
5.4 Choice among Lift, Ramp or Stair
5.5 Selection between Stepladder and Ladder
6 Assembly Instructions
Annex A (informative) Examples of the Changes in the Machine or System to Make Better Access Possible
Bibliography
