1 Scope
This standard specifies the model, dimension, shape, technical requirements, inspection methods and inspection rules of the modular units of the lower limb prosthesis used by lower limb amputees.
This standard is applicable to all kinds of modular units of the lower limb prosthesis, including prosthetic feet, ankle joints, knee joints, hip joints, connecting units and external decorative units.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191 Packaging — Pictorial Marking for Handling of Goods
GB/T 1931 Method for Determination of the Moisture Content of Wood
GB/T 3293 Chinese Shoe Sizing and Last Systems
GB/T 9174 General Specifications for Transport Packages of General Goods
GB/T 10000 Human Dimensions of Chinese Adults
GB/T 14191 Terminology for Prostherics and Orthotics
GB/T 18375 (all units) Prosthetics — Structural Testing of Lower-limb Prostheses
3 Terms and Definitions
For the purposes of this standard, the terms and definitions given in GB/T 14191 and the following apply.
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Model
5 Dimension and Shape
6 Technical Requirements
7 Inspection Methods
8 Inspection Rules
9 Sampling Rules
10 Marking, Packaging, Transportation and Storage
