1 Scope
This Part of GB 14287 specifies terms and definitions, classification, requirements, testing, inspection rules and marking for residual current electrical fire monitoring detectors.
This Part is applicable to the residual current electrical fire monitoring detector in electric fire monitoring system.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 4706.1-2005 Household and Similar Electrical Appliances - Safety - Part 1: General Requirements
GB/T 9969 General Principles for Preparation of Instructions for Use of Industrial Products
GB 12978 Rules for Test of Fire Electronic Products
GB 14287.3 Electrical Fire Monitoring System - Part 3: Temperature Sensing Electrical Fire Monitoring Detectors
GB 16838 Environmental Test Methods and Severities for Fire Electronic Products
GB/T 17626.2 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
GB/T 17626.3 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test
GB/T 17626.4 Electromagnetic Compatibility - Testing and Measurement Techniques-Electrical Fast Transient/Burst Immunity Test
GB/T 17626.5 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test
GB/T 17626.6 Electromagnetic Compatibility - Testing and Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio-frequency Fields
GB/T 17626.8 Electromagnetic Compatibility - Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test
GB/T 17626.11 Electromagnetic Compatibility - Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
GB 23757 Protection Requirements for Fire Electronic Products
3 Terms and Definitions
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Requirements
6 Testing
7 Inspection Rules
8 Marking
Appendix A (Normative) Residual Current Transformer