1 Scope
This standard specifies terms and definitions, model and specification, design requirements, performance requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of protective hood for firefighters.
This standard is applicable to the protective hood (hereinafter referred to as hood) worn by firefighters during firefighting and rescue.
This standard does not applicable to protective hood for firefighters that provides protection when handling hazardous chemical accident.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated reference, the latest edition (including all the amendments) applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB/T 2428 Head-face Dimensions of Adults
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 4802.3 Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 3: Pilling Box Method
GB/T 5455 Textiles - Burning Behaviour - Vertical Method
GB/T 7573 Textiles - Determination of pH of Aqueous Extract
GB/T 8629 Textiles - Domestic Washing and Drying Procedures for Textile Testing
FZ/T 01030-1993 Knitted Fabric and Elastic Woven Fabric - Determination of Maximum Force to Seam Rupture and Bursting Distension - Bursting Method
FZ/T 72004.2-2000 Finished Knitted Fabric
GA 10-2002 Protective Clothing for Firefighters
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
protective hood for firefighters
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Model and Specification
5 Design Requirements
6 Performance Requirements
7 Test Methods
8 Inspection Rules
9 Marking, Packaging, Transportation and Storage
Annex A (Normative) Test for Facial Opening Dimensional Stability
