1 Scope
This Standard specifies specification, technical requirements, inspection and test methods, type identification requirements, product acceptance rules and marking of steel drum etc.
This Standard is applicable to packaging steel drums for the transport, storage and treatment of low and intermediate level radioactive solid waste.
2 Normative References
The following standard contains provisions which, through reference in this Standard, constitute provisions of this Standard. As for normative references with clear date, any amended (excluding mistaken content) or revised version of them will not be applicable to this Standard and all parties concerned are encouraged to discuss the possibility of applying the latest version of those documents. For undated references, the latest edition is applicable to this Standard.
GB/T 325 Packaging Containers Steel Drum
GB/T 710 Hot-rolled Quality Carbon Structural Steel Sheets and Strips
GB/T 1720 Method of Test for Adhesion of Paint Film
GB/T 1731 Determination of Flexibility of Films
GB/T 1732 Determination of Impact Resistance of Film
GB/T 1771 Determination of Resistance to Salt Spray (Fog) of Film
GB/T 1804 General Tolerances－Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications
GB/T 1865 Determination of Aging (Manual Accelerated Aging) of Film
GB/T 4237 Hot Rolled Stainless Steel Sheets and Plates
GB 11806 Regulations for the Safe Transport of Radioactive Material
GB 12711 Standard of Safety for Low and Intermediate-level Solid Radioactive Wastes Packages
GB 13251 Packing Containers-Closure of Drums
JB 4700~JB 4707 Pressure Vessel Flanges
JB/T 4735-1997 Steel Welded Atmospheric Pressure Vessels
3 Specification of Steel Drum
3.1 Specification and dimension of steel drum
Foreword I
1 Scope
2 Normative References
3 Specification of Steel Drum
4 Technical Specifications of Steel Drum
5 Inspection and test method
6 Type Qualification Test and Acceptance
7 Product Acceptance Rules
8 Marking
