1 Scope
This standard specifies the limit value, monitoring and control requirements of air pollutants emission concentration for boiler in Shandong as well as the relevant requirements of standard implementation and supervision.
This standard is applicable to management of air pollutant emission from coal-fired, oil-fired and gas-fired boilers with various capacities and for various purposes except for pulverized coal-fired power generating boiler and coal-fired, oil-fired and gas-fired power generating boilers with the power greater than 45.5 MW (65t/h) as well as environmental impact assessment of construction projects, environmental protection engineering design, completion environmental protection acceptance and air pollutant emission management after construction project is put into operation.
As for boilers using biomass fuel, blast furnace gas or coal gas, coal water slurry as well as those using or co-firing with other fuels, the air pollutants emission concentration limit value for coal-fired boiler in this standard shall be complied with.
This standard is not applicable to the boilers with various capacities and using domestic wastes and hazardous wastes as fuel.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB 5468 Measuring Method for Smoke and Dust of Boiler Emission
GB/T 16157 The Determination of Particulates and Sampling Methods of Gaseous Pollutants Emitted from Exhaust Gas of Stationary Source
HJ/T 42 Stationary Source Emission - Determination of Nitrogen Oxide - Ultraviolet Spectrophotometric Method
HJ/T 43 Stationary Source Emission - Determination of Nitrogen Oxid-N(1-naphtye) - Ethylenediamine Dihydrochloride Spectrophotometric Method
HJ/T 56 Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source - Iodine Titration Method
HJ/T 57 Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source - Fixed-potential Electrolysis Method
HJ/T 75 Specifications for Continuous Emissions Monitoring of Flue Gas Emitted from Stationary Sources (On Trial)
HJ/T 76 Specification and Test Procedures for Continuous Emission Monitoring Systems of Flue Gas Emitted from Stationary Sources (On Trial)
HJ/T 373 Technical Specifications of Quality Assurance and Quality Control for Monitoring of Stationary Pollution Source (On Trial)
HJ/T 397 Technical Specifications for Emission Monitoring of Stationary Source
HJ/T 398 Stationary Source Emission - Determination of Blackness of Smoke Plumes - Ringelmann Smoke Chart
HJ 629 Stationary Source Emission - Determination of Sulphur Dioxide - Non-dispersive Infrared Absorption Method
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Pollutant Emission Control Requirements
5 Pollutant Monitoring Requirements
6 Implementation and Supervision
