1 Scope
This standard specifies the control, monitoring and testing of air pollutants emission for the vehicle maintenance and repair industry as well as the requirements on the implementation and supervision of this standard.
This standard is applicable to the air pollutants emission management of existing vehicle maintenance and repair plant as well as the environmental impact assessment, environment protection facility design, completion environmental protection acceptance and post-commissioning air pollutants emission management of the construction project of constructed, renovated or extended vehicle maintenance and repair plant.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 3186 Paints, Varnishes and Raw Materials for Paints and Varnishes - Sampling
GB/T 15432 Ambient Air - Determination of Total Suspended Particulates - Gravimetric Method
GB/T 16157 The Determination of Particulates and Sampling Methods of Gaseous Pollutants Emitted from Exhaust Gas of Stationary Source
GB/T16739.1-2004 Certification Requirements for Motor Vehicle Maintenance and Repair Enterprise - Part 1: for Motor Vehicle Maintenance and Repair
GB/T16739.2-2004 Certification Requirements for Motor Vehicle Maintenance and Repair Enterprise - Part 2: for Maintenance and Repair of Special Items
GB/T 23985-2009 Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Difference Method
GB/T 23986-2009 Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Gas-chromatographic Method
HJ/T 38 Stationary Source Emission - Determination of Nonmethane Hydrocarbons - Gas Chromatography
HJ/T 42 Stationary Source Emission - Determination of Nitrogen Oxide - Ultraviolet Spectrophotometric Method
HJ/T 43 Stationary Source Emission - Determination of Nitrogen Oxid - N(1-naphtye) - Ethylenediamine Dihydrochloride Spectrophotometric Method
HJ/T 55 Technical Guidelines for Fugitive Emission Monitoring of Air Pollutants
HJ/T 56 Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source Iodine Titration Method
HJ/T 57 Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source Fixed - Potential Electrolysis Method
HJ/T 373 Technical Specifications of Quality Assurance and Quality Control for Monitoring of Stationary Pollution Source (on Trial)
HJ/T 397 Technical Specifications for Emission Monitoring of Stationary Source
HJ 583 Ambient Air - Determination of Benzene and Its Analogies Using Sorbent Adsorption Thermal Desorption and Gas Chromatography
HJ 584 Ambient Air - Determination of Benzene and Its Analogies by Activated Charcoal Adsorption Carbon Disulfide Desorption and Gas Chromatograph
HJ 629 Stationary Source Emission - Determination of Sulphur Dioxide - Non-dispersive Infrared Absorption Method
HJ 692 Stationary Source Emission - Determination of Nitrogen Oxides - Non-dispersive Infrared Absorption Method
HJ 693 Stationary Source Emission - Determination of Nitrogen Oxides - Fixed potential by Electrolysis Method
HJ 732 Emission from Stationary Sources - Sampling of Volatile Organic Compounds - Bags Method
HJ 734 Stationary Source Emission - Determination of Volatile Organic Compounds - Sorbent Adsorption and Thermal Desorption Gas Chromatography Mass Spectrometry Method
DB 11/1195 Technical Specification for the Positioning of Stationary Source Monitoring Spots
3 Terms and Definitions
Contents
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements for Emission Control
5 Monitoring and Testing
6 Implementation and Supervision
Appendix A (Normative) Process Measures and Management Requirements
