1 Scope
This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transport, storage and accompanying documents of the snow plow.
This standard is applicable to snow plows mounted on vehicles, construction machinery and other traveling equipment to remove snow.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 3766 Hydraulic fluid power - General rules relating to systems
GB 4208 Degrees of protection provided by enclosure (IP code)
GB/T 6544 Corrugated fiberboard
GB/T 12464 Wooden boxes
GB/T 13306 Plates
GB/T 16471 Dimensional and weight constraints for transport package
JB/T 5943 Engineering machinery - General technical specifications for weldments
JB/T 5946 Engineering machinery - General technical specifications for paint coating
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
snow plow
a plow-shaped device used for removing snow on roads, which is an assembly consisting of a scraper blade, a blade, a connecting bracket, a hydraulic control system, an electric control system and the like
3.2
front-mounted snow plow
snow plow installed in front of the traveling equipment such as vehicles and construction machinery [see Figure 1a)]
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transport, storage, and accompanying documents
Annex A (Normative) Test reports
Annex B (Informative) Classification of road ice and snow
Annex C (Normative) Failure classification
