1 Scope
This part of YD/T 723-2007 specifies the types, specifications, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of laminated steel plastic strip for communication cable and optical fibre cable.
It is applicable to laminated steel plastic strip for communication cable and optical fibre cable. It can also be used for reference by stainless steel strip for optical fibre cable of optical fiber composite overhead ground wires.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of YD/T 723-2007. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply to this part.
GB/T 699-1999 Quality carbon structure steel
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (idt ISO 2859-1:1999)
GB/T 3199-1996 Wrought aluminium and aluminium alloy products - Packing marking transporting and storing
GB/T 3280-1992 Cold rolled stainless steel sheets and plates
GB/T 11115 Low density polyethylene resin
YD/T 723.1-2007 Laminated metal plastic strip for communication cable and optical fibre cable - Part 1: General
YD/T 723.2-2007 Laminated metal plastic strip for communication cable and optical fibre cable - Part 2: Laminated aluminium plastic strip
SJ/T 11363-2006 Requirements for concentration limits for certain hazardous substances in electronic information products
SJ/T 11365-2006 Testing methods for hazardous substances in electronic information products
3 Types and specifications
3.1 Types
Foreword i
1 Scope
2 Normative references
3 Types and specifications
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
