1 Scope
This part specifies the protocol conformance test method for user equipment (UE) of LTE FDD digital cellular mobile telecommunication network (Phase 1).
This part is applicable to all user equipment of LTE FDD digital cellular mobile telecommunication network (Phase 1).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
3GPP TS36.523-1 Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); User Equipment (UE) Conformance Specification; Part 1: Protocol Conformance Specification
3 Abbreviations
For the purposes of this document, the following abbreviations apply.
AM Acknowledge Mode
AS Access Stratum
BCCH Broadcast Control Channel
BSR Buffer Status Report
CCCH Common Control Channel
CGI Cell Global Identifier
C-RNTI Cell Radio Network Temporary Identifier
CSG Closed Subscriber Group
DCCH Dedicated Control Channel
DCI Downlink Control Indicator
DL-SCH Downlink Share Channel
DRB Data Radio Bearer
DRX Discontinuous Reception
DTCH Dedicated Traffic Channel
EHPLMN Equivalent Home PLMN
EMM Evolved Mobility Management
ePLMN Equivalent PLMN
EPS Evolved Packet System
ETWS Earthquake and Tsunami Warning Service
GUTI Globally Unique Temporary Identity
HARQ Hybrid Automatic Repeat reQuest
HPLMN Home PLMN
IMEI International Mobile Equipment Identity
MAC Medium Access Control
ME Mobile Equipment
MIMO Multiple Input Multiple Output
NAS Non-access Stratum
OPLMN Operator PLMN
PDCCH Physical Downlink Control Channel
PDCP Packet Data Convergence Protocol
PDN Public Data Network
PDU Protocol Date Unit
PLMN Public Land Mobile Network
PRACH Physical Random Access Channel
PUCCH Physical Uplink Control Channel
PUSCH Physical Uplink Shared Channel
RACH Random Access Channel
RAR Random Access Response
RI Rank Indicator
RLC Radio Link Control
RPLMN Registered PLMN
Foreword III
1 Scope
2 Normative References
3 Abbreviations
4 General
4.1 Test Environment
5 Operations in Idle Mode
5.1 PLMN Selection
5.2 Cell Selection
5.3 Closed Subscriber Group Cell
6 MAC Layer
6.1 Logical Channel and Transmission Channel Mapping
6.2 RACH
6.3 DL-SCH Data Transmission
6.4 UL-SCH Data Transmission
6.5 PUSCH Hopping
6.6 DRX Operation
6.7 Transport Block Size Support Function
6.8 RI Report
7 RLC Layer
7.1 Unacknowledge Mode
7.2 Acknowledge Mode
8 PDCP Layer
8.1 Radio Bearer PDCP SN Hold
8.2 PDCP Encryption
8.3 Integrity Protection
8.4 PDCP Handoff
8.5 Others
9 RRC Layer
9.1 RRC Connection Management Process
9.2 RRC Connection Reconfiguration
9.3 Measurement Configuration Control and Report
9.4 Others
10 EPS Mobility Management
10.1 EMM General Process
10.2 EMM Specific Procedure
10.3 EMM Connection Management Procedure
11 EPS Session Management
11.1 Dedicated EPS Bearer Context Activation
11.2 EPS Bearer Context Modification
11.3 EPS Bearer Context Deactivation
11.4 UE-requested PDN Connectivity
11.5 UE-requested PDN Disconnection
11.6 UE-requested Bearer Resource Allocation
11.7 UE-requested Bearer Resource Modification
11.8 UE Uplink Packet Router
12 E-UTRA Bearer Test
12.1 MIMO Unconfigured
12.2 MIMO Configured
13 Multilayer Procedure
13.1 Call Establishment
13.2 RRC Connection Reconfiguration
13.3 Connection Reestablishment
13.4 Mobility
14 ETWS
14.1 ETWS Reception under RRC_IDLE Status/Repeated Detection
14.2 ETWS Reception under RRC_CONNECTED Status/Repeated Detection
