Test Method for 2GHz WCDMA Digital Cellular Mobile Communication Network User Equipment (Phase 4) - Part:1 Basic Functions, Services and Performance Test of High Speed Packet Access (HSPA)
1 Scope
This part specifies test methods on such aspects as function, performance, service, environment, reliability, battery and charger for WCDMA user equipment (UE) (Phase 4) supporting high speed packet access (HSPA).
This part is applicable to various types of single-mode WCDMA UE (Phase 4) supporting high speed packet access (HSPA), and dual-mode and multi-mode WCDMA UE.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 4943 Safety of Information Technology Equipment
GB/T 18287 General Specification of Lithium-ion Battery for Cellular Phone
GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone
YD 1268.1 The Safety Specification and Test Method for Lithium Batteries and Charger
YD 1268.2 The Safety Specification and Test Method for Lithium Batteries and Charger
YD/T 1512 Testing Method for 2GHz TD-SCDMA/WCDMA CS Video Telephony Service Terminal
YD/T 1538 Technical Requirements and Testing Methods for Acoustics Performance of Digital Mobile Terminal
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1548.1-2009 Test Method for 2GHz WCDMA Digital Cellular Mobile Communication Network User Equipment (Phase III) - Part 1: Basic Functions, Services and Performance
YD/T 1591 Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment
YD/T 1595.1 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz WCDMA Digital Cellular Mobile Telecommunications System - Part 1: User Equipment and Ancillary Equipment
3GPP TS 25.133 Requirements for Support of Radio Resource Management (FDD)
3GPP TS 25.213 Spreading and Modulation (FDD)
3GPP TS 25.214 Physicals Layer Procedures (FDD)
3GPP TS 25.304 UE Procedures in Idle Mode and Procedures for Cell Reselection in Connected Mode
3GPP TS 25.321 Medium Access Control (MAC) Protocol Specification
3GPP TS 34.121-1 User Equipment (UE) Conformance Specification - Radio Transmission and Reception (FDD) - Part 1: Conformance Specification
3 Abbreviations
For the purpose of this part, the following abbreviations apply.
3.1 Abbreviations
Foreword i
1 Scope
2 Normative References
3 Abbreviations
3.1 Abbreviations
3.2 Symbols
4 Test Environment
5 Business
5.1 Telecommunication Service
5.2 Bearer Service
5.3 Supplementary Service
5.4 Value-added Service
6 Basic Functions of UE
7 RF Performance
7.1 General
7.2 Performance Test of Transmitter
7.3 Receiver Performance Test
7.4 Performance Index Requirements in Complex Propagation Environments
7.5 Radio Resource Management Performance Test
7.6 Performance Test for HSDPA
7.7 HSUPA Performance Test
8 Audio Frequency
9 Environment and Reliability
10 Requirements and Measurement Method for Standby Time and Talk Time of Mobile Station
11 Electro Magnetic Compatibility
12 Test of Specific Absorption Rate (SAR)
13 Test of Battery Charger
13.1 Battery Performance
13.2 Characteristics of Charger and Interface
14 Packing and Appearance
