标准编号:	YD/T 1181.3-2011
中文名称:	光缆用非金属加强件的特性 第3部分：芳纶增强塑料杆
英文名称:	Characteristics of non-metal reinforcement for optical fiber cables - Part 3: Aramid fiber reinforced plastic rods
行业分类:	YD    通信行业标准
发布机构:	中华人民共和国国家经济贸易委员会
发布日期:	2011-12-20
实施日期:	2012-2-1
标准状态:	valid
翻译语言:	英文
文件格式:	PDF
中文字符数:	6000 字
翻译价格(元):	360.0
交付时间:	付款后 1 个工作日

Characteristics of non-metal reinforcement for optical fiber cables - Part 3: Aramid fiber reinforced plastic rods 1 Scope This part specifies the designation, requirements and test methods of aramid fiber reinforced plastic (hereinafter referred to as KFRP) rods, a kind of non-metal reinforcement for optical fiber cables. This part is applicable to KFRP rods, a kind of non-metal reinforcement for optical fiber cables. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documents (including any amendments) applies. GB/T 4909.2 Test methods for bare wires - Part 2: Measurement of dimensions GB/T 13096-2008 Test method for mechanical properties of pultruded glass fiber reinforced plastic rods YD/T 1181.1-2002 Characteristics of non-metal reinforcement used for optical cable - Part 1: Glass fiber reinforced plastic rods YD/T 1181.2 Characteristics of non-metal reinforcement for optical fiber cables - Part 2: Aramid yarns 3 Designation The composition of product designation is shown in Figure 1. In the designation, the diameter is expressed in millimeters (mm), and the body diameter and coating diameter are only accurate to one decimal place.

Foreword i 1 Scope 2 Normative references 3 Designation 4 Requirements 5 Test methods