This national standard specifies the safety requirements of design, manufacture, installation, use, test, repair and alteration heater used in petroleum industry (hereinafter referred to as heater.
This standard is applicable to tube heater and cell type heater used in onshore oil industry.
Foreword
1 Scope
2 The normative references
3 Terminology and definition
4 General provisions
5 General requirements
5.1 Design
5.2 Manufacture
5.3 Installation
5.4 Repair and alteration
6 Material
7 Structure
8 Welding, test and experimentation
8.1 General requirements
8.2 Welding and post weld heat treatment
8.3 Appearance test
8.4 Non-destructive testing
9 Safeguard accessories
9.1 General requirements
9.2 Safety valve
9.3 Pressure gauge
9.4 Level gauge
10 Management
11 Periodic inspection
