Antiwear additive for jet fuels T1602
1 Scope
This standard specifies the technical requirements and test methods, inspection rules, and marking, packaging, transportation and storage for the refined petroleum acid as the antiwear additive for jet fuels.
The products in this standard are applicable to jet fuels.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition of the document referred to applies.
GB/T 260 Determination of water content in petroleum products
GB/T 1722 Estimation of colour of varnishes, boiled oils and thinners
GB/T 1884 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (GB/T 1884-2000, eqv ISO 3675:1998)
GB/T 1885 Petroleum measurement tables (GB/T 1885-1998, eqv ISO 91-2:1991)
GB/T 4756 Methods for manual sampling of petroleum liquids (GB/T 4756-1998, eqv ISO 3170:1988)
GB/T 6536 Petroleum products - Determination of distillation
SH 0164 Rules for the packing, storage, transport and inspection upon delivery of petroleum products
SH/T 0092 Petroleum acid detection method
SH/T 0687 Standard test method for measurement of lubricity of aviation turbine fuels by the ball-on-cylinder lubricity evaluator (BOCLE)
3 Terms and definitions
For the purposes of this standard, the following term and definition apply.
3.1
efficiency index (EI)
the index to indicate the lubricity of antiwear additive. The greater the efficiency index, the better the lubricity of antiwear additive
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements and test methods
5 Inspection rules
6 Marking, packaging, transportation and storage
Annex A (Normative) Determination of efficiency index of antiwear additive
