1 Subject Content and Application Scope
This standard specifies the determination of the precipitation number of lubricating oils.
This standard is applicable to lubricating oils.
2 Normative References
GB/T 262 Petroleum Products-Determination of Aniline Point
GB/T 1884 Crude Petroleum and liquid Petroleum Products-Laboratory Determination of Density-Hydrometer Method
GB/T 1885 Petroleum Measurement Tables
GB/T 4756 Petroleum Liquids-Manual Sampling
GB/T 6536 Petroleum Products-Determination of Distillation
3 Method Summary
At room temperature, take 10 mL of test specimen and dilute it until 100 mL with precipitation petroleum ether. After homogeneous mixing, rotate the centrifuge tube for 10 min under a relative centrifugal force between 600 ~ 700. And the millilitres of precipitate formed at the bottom of the centrifuge tube shall be regarded as the precipitation number of test specimen.
Contents
1 Subject Content and Application Scope
2 Normative References
3 Method Summary
4 Apparatus
5 Reagent
6 Test Procedures
7 Calculation
8 Precision
9 Report
Appendix A Quality Requirements for Precipitation Petroleum Ether (Additional)
Additional Explanations
