标准编号:	QJ A 1729-1996
中文名称:	航天天线测试方法
英文名称:	QJ A 1729-1996 Test Methods for Aerospace Antenna
中标分类:	V73    航天器控制导引系统
行业分类:	QJ    航天工业行业标准
ICS分类:	49.090 49.090    机上设备和仪器 49.090
实施日期:	1997-1-2
标准状态:	valid
替代旧标准:	QJ 1729-1989
翻译语言:	英文
文件格式:	PDF
中文字符数:	14000 字
翻译价格(元):	840.0
交付时间:	付款后 1 个工作日

Test methods for aerospace antenna 1 Scope 1.1 Subject content This standard specifies the general requirements and detailed requirements of conventional test methods for electrical property of aerospace antenna products. 1.2 Application scope This standard is applicable to the electrical property test of missiles, rockets, satellites, spacecraft antennas and space ground antennas. 2 Normative references GJB 7 Safety limit for microwave radiation QJ 1947 Definitions of terms for antennas QJ 2359 Standard test procedures for antennas SJ 2534.10 Test procedures for antennas - Measurement of power gain and directivity 3 Definitions 3.1 antenna under test the antenna to be tested itself and relevant components together with it 3.2 antenna range a test site consisting of instruments, equipment and physical space that meet the requirements for measurement of radiation characteristics of antenna See QJ 1947 for other terms. 4 General requirements 4.1 Basic assumptions and requirements 4.1.1 Antenna under test The radiation characteristics of the antenna under test are measured in the antenna range. Therefore, the following assumptions are made: a. For purpose of this standard, it is assumed that the antenna under test is a passive, linear and reciprocal device;

1 Scope 1.1 Subject content 1.2 Application scope 2 Normative references 3 Definitions 4 General requirements 4.1 Basic assumptions and requirements 4.2 Antenna range 4.3 Test apparatus for the antenna range 4.4 Model antenna 4.5 Microwave protection 5 Detailed requirements 5.1 Pattern measurement 5.2 Phase measurement 5.3 Polarization measurement 5.4 Gain measurement 5.5 Directivity measurement 5.6 Electrical boresight measurement 5.7 Measurement of input impedance (voltage standing wave ratio) 5.8 Measurement of power capacity 5.9 Measurement of isolation between antennas 5.10 Measurement of electrical property of radome Additional explanation