General specification for 50t launching and transporting & transferring vehicle chassis of missile
1 Scope
This specification specifies the general technical requirements, quality assurance provisions and preparation for delivery for 50t launching and transporting & transferring vehicle chassis of missile (hereinafter referred to as “the chassis”).
This specification is applicable to the development, production and acceptance of 50t launching and transporting & transferring vehicle chassis of missile. This specification is also applicable to the development, production and acceptance of chassis of transporting & transferring vehicles of missile.
2 Normative references
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB 146.1 Rolling stock gauge for standard gauge railways
GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equipped with C.I.E.
GB/T 4970-1996 Method of random input running test - Automotive ride comfort
GB/T 6323.4-1994 Controllability and stability test procedure for automobiles - Returnability test
GB/T 6323.5-1994 Controllability and stability test procedure for automobiles - Steering efforts test procedure
GB/T 6323.6-1994 Controllability and stability test procedure for automobiles - Steady static circular test procedure
GB 7258-2004 Safety specifications for power-driven vehicles operating on roads
GB 11555-1994 Motor vehicles - Windshield demisters - Performance requirements and test methods
GB 11556-1994 Motor vehicles - Windshield defrosters - Performance requirements and test methods
GB/T 12534-1990 Motor vehicles - General rules of road test method
GB/T 12535-1990 Motor vehicles - Starting performance - Test methods
GB/T 12536-1990 Motor vehicles - Coastdown - Test method
GB/T 12538-2003 Road vehicles with two axles - Determination of centre of gravity
GB/T 12539-1990 Motor vehicles steep hill climbing test method
GB/T 12540-1990 Motor vehicles - Minimum turning diameter - Method of measurement
GB/T 12541-1990 Motor vehicles - Passing topography capacity - Test method
GB/T 12542-1990 Motor vehicles - Cooling capacity for engine cooling system - Test method on road
GB/T 12543-1990 Motor vehicles - Acceleration performance - Test method
GB/T 12544-1990 Motor vehicles - Maximum speed - Test method
GB/T 12545.2-2001 Commercial vehicle - Fuel consumption - Test method
GB/T 12546-1990 Motor vehicles - Ventilation and heat insulation - Test method
GB/T 12547-1990 Motor vehicles - Minimum stable speed - Test method
GB/T 12548-1990 Motor vehicles - Speedometer and odometer - Calibration method
GB/T 12673-1990 Motor vehicles - Basic dimensions - Measuring method
GB/T 12674-1990 Motor Vehicles - Weight parameter - Measuring method
GB 12676-1999 Motor vehicles - Braking systems - structure and performance and test methods
GB/T 12677-1990 Motor vehicles - Technical condition - Inspection method
GB/T 12678-1990 Reliability running test method for automobiles
GB 15082-1999 Speed meters for motor vehicle
GB/T 15705-1995 Trucks - 0perating position dimensions of driver
GJB 145A-1993 Specification of preservation packaging
GJB 150.10-1986 Environmental test methods for military equipments—Fungus test
GJB 150.11-1986 Environmental test methods for military equipments—Salt fog test
GJB 805.3-1990 General specification for ground support equipments of ground-to-ground strategic missile - Design and manufacturing requirements
GJB 805.4-1990 General specification for ground support equipments of ground-to-ground strategic missile - Environmental condition and test methods
GJB 900-1990 General requirements for materiel safety program
GJB 1041-1990 General specification for special purpose vehicles of missile ground equipment
GJB 1107-1991 Maintainability specification for military motor vehicles
GJB 1473-1992 Military motor vehicle safety requirements
GJB 1843-1993 Requirements of electrical system for military motor vehicles
GJB 2948 Materiel transportation system dimensional and weight constraints
GJB 3463-1998 Specification for central tire inflation/deflation system of military off-road vehicles
JTG B01 Technical standard of highway engineering
QC/T 57-1993 Measurement methods for noise emitted by motor vehicles at constant speed
QC/T 58-1993 Measurement methods for noise emitted by accelerating motor vehicles
QC/T 484-1999 Automobiles - Paint coating
QC/T 518-1999 Tightening torque for automotive threaded fasteners
QC/T 900-1997 Quality inspection and assessment method for products for complete motor vehicles
3 Requirements
3.1 General
The chassis shall meet all the requirements specified in this specification and in relevant detailed specifications. If the requirements of this specification are inconsistent with the detailed specifications, the detailed specifications shall prevail.
3.2 Dimensions
The dimensions of the chassis shall be as follows:
a) the length, width, height and other dimensions of the chassis shall meet the road requirements of road capacity specified in JTG B01, and they shall meet the requirements of GB 146.1 when there are railway transportation requirements for the chassis;
b) parameters such as the approach angle, departure angle, minimum ground clearance, longitudinal-through radius and transverse-through radius shall meet the requirements of road capacity, and the specific requirements shall be in accordance with the detailed specifications.
3.3 Mass
