Straight grease nipple
1 Subject content and applicable scope
This standard specifies types, dimensions and specifications of straight grease nipple.
It is applicable to grease nipple of automobile for filling grease.
2 Normative references
GB 5267 Electroplated coatings on threaded fasteners
GB 700 Ordinary carbon structural steel - Technical requirements
GB 699 Quality carbon structure steel - Grades and technical requirements
GB 1159 Grease cup - Technical specification - Packaging and marking
GB T04 002 Inched taper thread with 60° tooth profile
GB 308 Rolling bearings - Steel balls
YB 191 Free-cutting steel - Technical requirements
GB 4357 Carbon spring steel wires
GB 1415 Metric tape screw thread
3 Type and dimension
See Figure 1 for the type and dimension of straight grease nipple; the type and dimension shall meet those specified in Table 1.
1 Subject content and applicable scope
2 Normative references
3 Type and dimension
4 Marking
5 Technical requirements
6 Acceptance inspection, marking and packaging
Additional explanation
