1 Subject content and applicable scope
This standard specifies testing method for the performance of plastic moulded parts (hereinafter referred to as “moulded parts”) that are used for automobiles.
It is applicable for various plastic moulded parts that are used for automobiles but not for foam moulded parts, cushions, electroplated moulded parts and coating moulded parts.
2 Normative references
GB 209 Sodium hydroxide for industrial use
GB 252 Light diesel fuels
GB 435 Gasoline engine oils
GB 484 Petrol (gasoline) for motor vehicles
GB 534 Sulphuric acid for industrial use
GB 2918 Plastics - Standard atmospheres for conditioning and testing
GB 5671 General purpose lithium lubricating grease for automobile
JB 3979 Test methods for automobile steering wheel
QC/T 17 General rules for weather resistance of automobile parts
SY 4005 No. 4604 synthetic brake oil
3 Test items
Test items shall be the following 11.
a. Temperature resistance test
b. Weatherability test
c. Water resistance test
d. Humidity test
e. Test liquid resistance test
f. Vibration resistance test
g. Impact resistance test
h. Wear resistance test
1 Subject content and applicable scope
2 Normative references
3 Test items
4 General conditions of tests
5 Test methods
6 Evaluation Items
7 Test report
Additional explanation:
