1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of case-handle.
This standard is applicable to various case-handles for case and bag.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2912.1-1998 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 17592-2006 Textiles - Determination of the Banned Azo Colourants
GB/T 19941 Leather and Fur - Chemical Tests - Determination of Formaldehyde Content (GB/T 19941-2005, ISO/TS 17226: 2003, MOD)
GB/T 19942 Leather and Fur - Chemical Tests - Determination of Banned Azo Colourants (GB/T 19942-2005, ISO/TS 17234: 2003, MOD)
QB/T 2002.1-1994 Technical Conditions of Electroplated Layer of Leather Hardware Fittings
QB/T 2921 Case and Bag - Test Method for Fall Down
QB/T 2922 Case and Bag - Test Method for Shaking Impact
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
QB/T 3832 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
