1 Scope
This standard specifies classification and marking, general specifications, requirements, test methods, inspection rules, marking, packaging, transportation and storage of bracket for solar photovoltaic system.
This standard is applicable to bracket for solar photovoltaic system mounted in buildings, structures and auxiliary locations.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 699 Quality Carbon Structure Steels
GB/T 700 Carbon Structural Steels
GB 912 Hot-rolled Sheets and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
GB/T 1220 Stainless Steel Bars
GB/T 1591 High Strength Low Alloy Structural Steels
GB/T 3077 Alloy Structure Steels
GB/T 3098.6 Mechanical Properties of Fasteners—Stainless Steel Bolts, Screws and Studs
GB/T 3190 Wrought Aluminium and Aluminium Alloys—Chemical Composition
GB/T 3274 Hot-rolled Plates and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
GB/T 3280 Cold Rolled Stainless Steel Plate, Sheet and Strip
GB/T 4171 Atmospheric Corrosion Resisting Structural Steel
GB/T 4226 Cold Finished Stainless Steel Bar
GB/T 4237 Hot Rolled Stainless Steel Plate, Sheet and Strip
GB/T 4238 Heat-resisting Steel Plate, Sheet and Strip
GB/T 5117 Covered Electrodes for Manual Metal Arc Welding of Non-alloy and Fine Grain Steels
GB/T 5118 Covered Electrodes for Manual Metal Arc Welding of Creep-resisting Steels
GB 5237.1 Wrought Aluminium Alloy Extruded Profiles for Architecture—Part 1: Mill Finish Profiles
GB 5237.2 Wrought Aluminium Alloy Extruded Profiles for Architecture—Part 2: Anodized Profiles
GB 5237.3 Wrought Aluminium Alloy Extruded Profiles for Architecture—Part 3: Electrophoretic Coating Profiles
GB 5237.4 Wrought Aluminium Alloy Extruded Profiles for Architecture—Part 4 : Powder Coating Profiles
GB 5237.5 Wrought Aluminium Alloy Extruded Profiles for Architecture—Part 5 : PVDF Coating Profiles
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Marking
5 General Specifications
6 Requirements
7 Test Method
8 Inspection Rules
9 Marking, Packaging, Transportation and Storage
Annex A (Normative) Test Method of Deformation Performance for Main Stressed Members of the Bracket for Solar Photovoltaic System
