1.0.1 This standard is formulated with a view to follow out a guideline of making the application of architectural glass meet the requirements of “Secure, Applicable, Economic and Aesthetic”
1.0.2 This standard is applicable to the application design and installation of architectural glass.
1.0.3 Not only the requirements stipulated in this standard, but also those in the current relevant ones of the nation shall be complied with in the application design and installation of architectural glass and installation material.
Contents 1 General provisions 2 Terms and symbols 2.1 Terms 2.2 Symbols 3 Glass and installation material 3.1 Glass 3.2 Glass Installation material of glass 4 Design of wind resistance of glass 4.1 Determination of wind load 4.2 Design of wind resistance 5 Thermal break-proof of architectural glass 5.1 Design 5.2 Protection measure of glass thermal break 6 Safety requirements of body impact 6.1 General requirement 6.2 Selection of glass 6.3 Protective measure 7 Installation 7.1 Requirements of installation dimension 7.2 Use of installation materials of glass 7.3 Installation requirements of lateral displacement resistance of glass 8 Shutter, roof glass and sloping roof windowpane 8.1 Shutter glass 8.2 Roof glass 9 Underwater-used glass 9.1 Performance requirements of underwater-used glass 9.2 The design calculation of underwater-used glass 10 Indoor hollow glass brick partition 10.1 Requirements of material performance 10.2 Requirements of design and construction 11 Performance Design of Glass Heat Engineering 11.1 Heat transfer of glass 11.2 Design rule of thermal glass Appendix A The maximum allowable area of general sort of glass Appendix B The calculation of central temperature T and frame temperature T of glass plate Appendix C The calculation method of coefficient of heat transfer ( U value) of glass Appendix D The determination of emissivity and gas characteristic
