Special products of silicon carbide - Reaction bonded silicon carbide plate
1 Scope
This standard specifies the product classification and labeling, technical requirements, test methods, inspection rules and marking, packaging, transportation, and storage of reaction bonded silicon carbide plates.
This standard is applicable to reaction bonded silicon carbide plates with working temperature not higher than 1,350°C.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2997-2000 Test method for bulk density, apparent porosity and true porosity of dense shaped refractory products (eqv ISO 5017)
GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature (ISO 14704:2000, MOD)
GB/T 10325-2001 Shaped refractory products - Sampling and acceptance testing
GB/T 10326-2001 Refractory products - Inspections of dimension appearance and section (eqv ISO 12678-1 ~ 2)
GB/T 11337-2004 Measurement of departures from flatness
GB/T 14390-2008 Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature (ISO 17565:2003)
GB/T 16546-1996 Shaped refractory products - Packing, marking, transportation and storage
JB/T 5204-2007 Chemical analysis methods for silicon carbide deoxyden
3 Product classification and labeling
3.1 Shape, code, specifications and dimensions
3.1.1 General refractory slab: code: SiSiC-P; its shape and dimensions are shown in Figure 1 and Table 1.
Foreword i
1 Scope
2 Normative references
3 Product classification and labeling
4 Technical requirements
5 Inspection methods
6 Inspection rules
7 Packaging, marking, transportation and storage
