1Scope
This standard specifies the classification, requirements, tests, inspection rules, marking, plate, operating instructions as well as packaging, transportation and storage, etc. of sewage treatment equipment (hereinafter referred to as equipment).
This standard is applicable to the equipment for sewage purification and discharge with any method.
2Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, all the editions listed are valid. All standards are subject to revision. Parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below.
GB 150-1998 Steel Pressure Vessels
GB 191-1990 Packaging-Pictorial Markings for Handling of Goods
GB/T 4720-1984 Electric-driving Controlgear-Part 1: Electric-driving Controlgear Composed of Low-voltage Apparatus
GB/T 6388-1986 Transport Package Shipping Mark
GB/T 8923-1988 Rust Grades and Preparation Grades of Steel Surfaces before Application of Paints and Related Products
GB/T 13306-1991 Plates
GB/T 13384-1992 General Specification for Packagings of Mechanical and Electrical Products
GB/T 19001-1994 Quality Systems-Model for Quality Assurance in Design, Development, Production, Installation and Servicing
GB/T 19002-1994 Quality Systems-Model for Quality Assurance in Production, Installation and Servicing
JB/T 2536-1980 Painting, Packing and Transportation for Pressure Vessels
JB/T 2932-1999 Specification for Water Treatment Equipments
JB/T 5995-1992 Preparation Provisions for Operating Instructions of Mechanical and Electrical Products
JB 8939-1999 Technical Safety Instruction of Equipment Prevention and Treatment of Water Potlution
3Definition
Foreword I
1 Scope
2 Normative References
3 Definition
4 Classification
5 Requirements
6 Tests
7 Inspection Rules
8 Marking, Plate and Operating Instructions
9 Packaging, Transportation and Storage
