1 Scope
This standard specifies basic parameters, technical requirements, test methods, inspection rules, mark, transport, storage and quality assurance date of battery reach trucks with rated lifting capacity 500kg~5000kg.
This standard is applicable to battery reach trucks with gantry lifting or fork lifting. Manipulation mode of battery reach trucks (hereinafter referred to as "trucks") is walking type and riding type (sitting type and standing type).
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
Contents
Foreword I
1 Scope
2 Normative References
3 Basic Parameters
4 Technical Requirements
4.1 Basic Requirements
4.2 Allowable Manufacture Range of Structure Dimension and Performance Parameter
4.3 Strength
4.4 Service Performance
4.5 Safety and Environmental Protection Requirements
5 Test Methods
5.1 Preparation Work before Test
5.2 General Test Conditions
5.3 Measurement of Main Structure Parameters and Technical Characteristic Parameters
6 Inspection Rules
7 Marking, Transport and Storage
8 Quality Assurance Date
