标准编号:	JB/T 1647.1-2012
中文名称:	闭式压力机 第1部分：型式与基本参数
英文名称:	Straight sided mechanical power press — part 1：Types and basic parameters
中标分类:	J62    锻压机械
行业分类:	JB    机械行业标准
ICS分类:	25.120.10 25.120.10    锻压设备、冲压机、剪切机 25.120.10
发布机构:	中华人民共和国国家经济贸易委员会
发布日期:	2012-5-24
实施日期:	2012-11-1
标准状态:	现行
替代旧标准:	JB/T 1647-1999 闭式单、双点压力机 型式与基本参数
翻译语言:	英文
文件格式:	PDF
中文字符数:	8000 字
翻译价格(元):	480.00 元
交付时间:	付款后 1 个工作日

1 Scope



This part of JB/T 1647 specifies the types and basic parameters of straight-sided mechanical power press.



This part is applicable to newly designed straight-side single, two and four-point presses for general use.



2 Types



The types of presses are divided into straight-side single point press (see Figure 1), straight-side two-point press and straight-side four-point press (see Figure 2).

Foreword i
1 Scope
2 Types
3 Basic parameters
Figure 1 Straight-side single-point press
Figure 2 Straight-side two-point press and straight-side four-point press
Table 1 Nominal force range of straight-side single, two and four-point press
Table 2 The basic parameters of straight-side single-point press
Table 3 The basic parameters of straight-side two-point press
Table 4 The basic parameters of straight-side four-point press
Table 5 Series parameters of accessory cushion of straight-side one point press
Table 6 Series parameters of accessory cushion of the straight-side two-point press
Table 7 Series parameters of accessory cushion of the straight-side four-point press