1 Scope
This part of JB/T 12474 specifies working conditions, style and parameter, technical requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of stamping machines of 4.3m, 5.5m, 6m and 6.25m side-charging vertical stamping type coke oven.
It is applicable to the stamping machine of side-charging vertical stamping type coke oven, which is used under the coal tower according to coal loading process to tamp the coal in coalcake mold of the charging car (or charging-pusher car). It is also applicable to the stamping machine on vehicle-mounted stamping-charging car.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 985.1 Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
GB/T 985.2 Recommended joint preparation for submerged arc welding
GB/T 1591-2008 High strength low alloy structural steels
GB 4208-2008 Degrees of protection provided by enclosure (IP code)
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 10095.1-2008 Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.2-2008 Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 14039-2002 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
JB/T 5000.1 Heavy mechanical general techniques and standards - Part 1: Check of product
JB/T 5000.2-2007 Heavy mechanical general techniques and standards - Part 2: Oxygen cutting workpiece
JB/T 5000.3 Heavy mechanical general techniques and standards - Part 3: Weldment
JB/T 5000.8-2007 Heavy mechanical general techniques and standards - Part 8: Forging
JB/T 5000.10 Heavy machinery general technical conditions - Part 10: Assembly
JB/T 5000.11 Heavy mechanical general techniques and standards - Part 11: Attached piping
JB/T 5000.12 Heavy mechanical general techniques and standards - Part 12: Paint
JB/T 5000.13 Heavy mechanical general techniques and standards - Part 13: Packing
JB/T 6392 Rail wheels for crane
JB/T 6996 Common technical condition of heavy machinery hydraulic system
JB/T 7929-1999 Cleanliness for gear drive units
JB/T 10607 Guidelines for use of hydraulic system fluids
3 Working conditions
Foreword i
1 Scope
2 Normative references
3 Working conditions
3.1 Complementary conditions
3.2 Power supply system
3.3 Climatic conditions
3.4 Track requirements
4 Style and parameter
4.1 Style
4.2 Working parameters
5 Technical requirements
5.1 General requirements
5.2 Technical requirements of main parts and components
5.3 Assembling requirements
5.4 Hydraulic system
5.5 Electrical equipment
5.6 Painting
5.7 Safety
6 Test methods
6.1 In-plant test
6.2 Field test
7 Inspection rules
7.1 End-of-manufacturing inspection
7.2 Field acceptance
8 Marking, packaging, transportation and storage
8.1 Marking
8.2 Packaging
8.3 Transportation
8.4 Storage
