1 Application Scope
This standard specifies the terms and definitions, basic requirements, technical contents and testing method of environmental labeling products such as digital copying (including multi-function) devices (hereafter referred to as copying device).
This standard is applicable to black-and-white copying device, color copying device and digital multi-function copying device with basic function of copying.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For undated references, the valid edition of the normative document referred to applies.
GB 21521 Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Copy Machines, Printers and Fax Machines
GB/T 13334 Adjusting Test Chart for Copying Machine A3
GB/T 16288 Marking of Plastics Products
GB/T 18313 Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment
GB/T 18455 Package Recycling Marking
GB/T 21202 Digital Multi-function Monochrome Copier (Printer) Device
GB/T 26572 Requirements of Concentration Limits for Certain Restricted Substances in Electrical and Electronic Products
GB/T 29793 Color Copying (including Multi-function) Devices
HJ 570 Technical Requirement for Environmental Labeling Products Toner Cartridge
HJ 2512 Technical Requirement for Environmental Labeling Products Printers, Fax Machines, Multifunction Devices
ISO/IEC 28360 Information Technology - Office Equipment - Determination of Chemical Emission Rates from Electronic Equipment
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
digital copying (including multi-function) devices
the device that converts the original image or text to digital signal by scanning and then copies them in static imaging mode after digital processing; multi-function refers to including one or multiple additional functions (e.g. print, telephone, fax, scan, network etc.) at the same time
Foreword i
1 Application Scope
2 Normative References
3 Terms and Definitions
4 Basic Requirements
5 Technical Contents
6 Inspection Methods
Annex A (Normative) Environmental Design Requirements for Products
Annex B (Normative) Phthalic Acid Esters
Annex C (Normative) Polycyclic Aromatic Hydrocarbons (PAHs)
Annex D (Informative) Sample Preparation Process for Emission Rate of TVOC, Benzene, Styrene and VOC in an Unidentified Substance
Annex E (Informative) Sample Preparation Process of Ozone Emission Rate
Annex F (Informative) Sample Preparation Process of Fine Particulate Matter Emission Rate
