1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and contract (or order) contents of the lithium hydroxide monohydrate.
This standard is applicable to the lithium hydroxide monohydrate products which are made from lithium ore or brine.
2 Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
GB 190 Packing symbol of dangerous goods
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 6678-2003 General principles for sampling chemical products
GB/T 11064 (all parts) Methods for chemical analysis of lithium carbonate, lithium hydroxide monohydrate and lithium chloride
3 Requirements
3.1 Product classification
According to chemical composition, the lithium hydroxide monohydrate products are classified into four designations, i.e., LiOH·H2O-T1, LiOH·H2O-T 2, LiOH·H2O-1 and LiOH·H2O-2.
3.2 Chemical composition
Chemical composition of the lithium hydroxide monohydrate products shall be in accordance with those specified in Table 1.
Foreword i
1 Scope
2 Normative references
3 Requirements
4 Inspection methods
5 Inspection rules
6 Marking, packaging, transportation, storage and quality certificate
7 Contract (or order) contents
Annex A (Normative) Methods for chemical analysis of water insolubles in lithium hydroxide monohydrate
