标准编号:	GB/T 819.2-1997
中文名称:	十字槽沉头螺钉 第2部分:钢8.8、不锈钢A2-70和有色金属CU2或CU3
英文名称:	Cross recessed countersunk flat head screws(common head style)-Grade A-Part 2: Steel of property class 8.8,stainless and non-ferrous metals
中标分类:	J13    紧固件
行业分类:	GB    国家标准
ICS分类:	21.060.10 21.060.10    螺栓、螺钉、螺柱 21.060.10
发布机构:	国家质量监督检验检疫总局
发布日期:	1997-8-5
实施日期:	1998-4-1
标准状态:	superseded
被新标准替代:	GB/T 819.2-2016 十字槽沉头螺钉 第2部分：8.8级、不锈钢及有色金属螺钉
被替代日期:	2016-6-1
翻译语言:	英文
文件格式:	PDF
翻译字数:	4,000 字
交付时间:	1 个工作日

1 Scope This standard specifies the cross recessed countersunk flat head screw, the screw thread specification of which is M2~M10, performance grade is steel 8.8, stainless steel A 2-70 and non-ferrous CU2 or CU3. In particular cases, if technical conditions out of this standard is required, they shall be selected from current national standards, such as GB 193, GB 3098.1, GB 3098.6, GB/T 3098.10, GB 3103.1, GB 31063106 and GB 9145. 2 Referenced Standards The provisions of the following standard, through reference into this standard, constitute provisions of this standard. At the time of publication, all editions indicated are valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below.