标准编号:	GB/T 7813-2008
中文名称:	滚动轴承 剖分立式轴承座 外形尺寸
英文名称:	Rolling bearings - Split type plummer block housings - Boundary dimensions
中标分类:	J11    滚动轴承
行业分类:	GB    国家标准
ICS分类:	21.100.20 21.100.20    滚动轴承 21.100.20
发布机构:	国家质量监督检验检疫总局 国家标准化管理委员会
发布日期:	2008-02-28
实施日期:	2008-8-1
标准状态:	superseded
被新标准替代:	GB/T 7813-2018 滚动轴承 剖分立式轴承座 外形尺寸
被替代日期:	2019-5-1
替代旧标准:	GB/T 7813-1998 滚动轴承附件 轴承座 外形尺寸
翻译语言:	英文
文件格式:	PDF
中文字符数:	10000 字
翻译价格(元):	700.0
交付时间:	付款后 1 个工作日

1 Scope This Standard specifies boundary dimensions for two bolt plummer block housings and four bolt plummer block housings (hereafter referred to as housings) This Standard is applicable to self-aligning ball bearings and self-aligning roller bearings for design of bearing manufacturer and type selection of user. 2 Terms and Definitions For the purposes of this Standard, the following terms and definitions apply. 2.1 Two bolt plummer block housings Housings with two cap bolts and two attachment bolt holes in the base. See Figures 1 and 2. 2.2 Four bolt plummer block housings Housings with four cap bolts and four attachment bolt holes in the base. See Figure 3. 3 Symbols

Contents Foreword I 1 Scope 2 Terms and Definitions 3 Symbols 4 Structures and Boundary Dimensions Appendix A Appendix B