1 Scope
This Standard specifies the classification, requirements, inspection methods, inspection rules as well as marking, packaging, transportation and storage of the offset lithographic prints for decorating.
This Standard is applicable to the offset lithographic paper prints for decorating. Other lithographic prints may also refer to it.
2 Normative References
The following standards contain provisions which, through reference in this Standard, constitute provisions of this Standard. For dated reference, subsequent amendments to (excluding corrigendum) or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this Standard are encouraged to study whether the latest editions of these documents apply. For undated reference, the latest edition of the normative documents referred to applies.
GB/T 2828.1 Sampling Procedures for Inspection by Attributea - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit(AQL) for Lot-by-lot Inspection (GB/T 2828.1-2003, ISO 2859-1: 1999, IDT)
GB/T 17934.1-1999 Graphic Technology - Process Control for the Manufacture of Half-tone Colour Separations, Proof Production Prints - Part 1: Parameters and Measurement Methods (eqv ISO 12647-1: 1996)
GB/T 18720 Graphic Technology - The Application of Printing Control Strip (GB/T 18720-2002, DIN 16527-1: 1993, DIN 16527-3: 1993, NEQ)
GB/T 18722 Graphic Technology - Application of Reflection Densitometry and Colorimetry to Process Control in Graphic Arts (GB/T 18722-2002, eqv ISO 13656: 2000)
CY/T 3 Standard Illuminating and Observing Conditions for Colour Evaluation
ISO 13655 Graphic Technology - Spectral Measurement and Colorimetric Computation for Graphic Arts Images
ISO 14981 Graphic Technology - Process Control - Optical, Geometrical and Metrological Requirements for Reflection Densitometers for Graphic Arts Use
ISO 15994 Graphic Technology - Testing of Prints - Visual Lustre
3 Terms and Definitions
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification of the Product
5 Technical Requirements
6 Inspection Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
Bibliography
