标准编号:	GB/T 5591.3-2008
中文名称:	电气绝缘用柔软复合材料 第3部分：单项材料规范
英文名称:	Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
中标分类:	K15    电工绝缘材料及其制品
行业分类:	GB    国家标准
ICS分类:	29.035.99 29.035.99    其他绝缘材料 29.035.99
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:	2008-11-7
实施日期:	2009-10-1
标准状态:	superseded
被新标准替代:	GB/T 5591.3-2018 电气绝缘用柔软复合材料 第3部分：单项材料规范
被替代日期:	2019-1-1
替代旧标准:	JB/T 4062.1-1995 聚酰亚胺薄膜聚芳酰胺纤维纸柔软复合材料 JB/T 4060-1991 聚酯薄膜聚酯纤维非织布柔软复合材料 JB/T 4059-1991 聚酯薄膜绝缘纸柔软复合材料
翻译语言:	英文
文件格式:	PDF
中文字符数:	15000 字
翻译价格(元):	1120.0
交付时间:	付款后 1 个工作日

1 Scope This part of GB/T 5591 specifies classification, designation, performance requirements, test methods and terms of delivery for individual combined flexible materials for all kinds of electrical insulation. This part is applicable to combined flexible materials for electrical insulation. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 5591. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 5591.1-2002 Combined flexible materials for electrical insulation — Part 1:Definitions and general requirements (IEC 60626-1:1995, MOD) GB/T 5591.2-2002 Combined flexible materials for electrical insulation — Part 2: Methods of test (IEC 60626-2:1995, MOD) GB/T 11026.1-2003 Electrical insulating materials — Properties of thermal endurance — Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2001, IDT) GB 12802.2-2004 Film for electrical insulation — Part 2: Polythylene terephthalate film used for electrical insulation (IEC 60674-3-2:1992, MOD) GB/T 13542.6-2006 Film for electrical insulation — Part 6: Polyimide films for electrical insulation (IEC 60674-3-4/6:1993, MOD) GB/T 20628.1-2006 Specification for cellulosic papers for electrical purposes — Part 1: Definitions and general requirements (IEC 60554-1:1977, MOD) GB/T 20629.1-2006 Non-cellulosic paper for electrical purposes — Part 1: Definitions and general requirements (IEC 60819-1:1995, IDT) JB/T 2197-1999 Product classification, designation and model compilation methods of electrical insulation materials JB/T 3730-1999 Test method for evaluating the thermal endurance properties of insulating combined flexible materials by method of poof voltage test with wrapped tube JB/T 8989.1-1999 Specification for pressboard and presspaper for electrical purposes — Part 1: Definitions and general requirements (eqv IEC 60641-1:1979) JB/T 9554-1999 Electrical polyester non-woven fabric JC/T 170-2002 E-glass fiber fabrics IEC 60554-3 Specification for cellulosic papers for electrical purposes — Part 3: Specifications for individual materials IEC 60641-3 Specification for pressboard and presspaper for electrical purposes — Part 3: Specifications for individual materials IEC 60819-3 Specification for non-cellulosic papers for electrical purposes — Part 3: Specifications for individual materials 3 Composition and designation of Combined Flexible Materials 3.1 Classification Combined flexible materials are classified according to composition and structure, see Table 1.