标准编号:	GB/T 43880.1-2024
中文名称:	服务型制造 导则 第1部分：体系架构
英文名称:	Service-oriented manufacturing—Guideline—Part 1：System architecture
中标分类:	J04    基础标准与通用方法
行业分类:	GB    国家标准
ICS分类:	03.080.10 03.080.10    工业服务 03.080.10
发布机构:	国家市场监督管理总局 国家标准化管理委员会
发布日期:	2024-3-15
实施日期:	2024-10-1
标准状态:	valid
翻译语言:	英文
文件格式:	PDF
中文字符数:	14000 字
翻译价格(元):	980.0
交付时间:	付款后 1 个工作日

GB/T 43880.1-2024 Service-oriented manufacturing - Guideline - Part 1: System architecture 1 Scope This document specifies the technical framework, the logic structure of the standard system and the standard system framework for service-oriented manufacturing. This document is applicable to the standardization construction of service-oriented manufacturing by government authorities, enterprises and institutions, research institutes and relevant organizations related to service-oriented manufacturing. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 13016 Principles and requirements for constructing standard system GB/T 43879-2024 Service-oriented manufacturing - General terminology JB/T 12516 Modern manufacturing service - Equipment manufacturing industry - Terminology 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 13016, GB/T 43879-2024 and JB/T 12516 apply. 4 Technical architecture of service-oriented manufacturing 4.1 General From the perspective of a service-oriented manufacturing enterprise, the basic logical structure of the technical reference model of service-oriented manufacturing is determined by sorting out the characteristics of service-oriented manufacturing and the key elements involved, and combining the needs of the fields and application scenarios involved in service-oriented manufacturing. 4.2 Technical reference model The technical reference model of service-oriented manufacturing is divided into manufacturing resource layer, supporting technology layer, core service layer, industry application layer, and demand target layer according to the layered design principle of information system. The technical reference model shall be progressive from the bottom up, layer by layer, as shown in Figure 1.

Foreword i Introduction ii 1 Scope 2 Normative references 3 Terms and definitions 4 Technical architecture of service-oriented manufacturing 5 Logical structure of service-oriented manufacturing standard system 6 Framework of service-oriented manufacturing standard system Bibliography