标准编号:	GB/T 42601.3-2023
中文名称:	石油、重化学和天然气工业 润滑、轴密封和控制油系统及辅助设备 第3部分：一般用途的油系统
英文名称:	Petroleum, petrochemical and natural gas industries—Lubrication, shaft-sealing and control-oil systems and auxiliaries—Part 3: General-purpose oil systems
中标分类:	J72    压缩机、风机
行业分类:	GB    国家标准
ICS分类:	75.180.20 75.180.20    加工设备 75.180.20
发布机构:	国家市场监督管理总局 国家标准化管理委员会
发布日期:	2023-05-23
实施日期:	2023-12-1
标准状态:	valid
翻译语言:	英文
文件格式:	PDF
中文字符数:	40000 字
翻译价格(元):	2800.0
交付时间:	付款后 1~3 个工作日

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries- Part 3 : General-purpose oil systems 1 Scope This document, in conjunction with ISO 10438-1, specifies requirements for oil systems for general-purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps and drivers. Note: The term "general-purpose" is defined in ISO 10438-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 42601.1-2023 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007, IDT) ISO 10438-1 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1 : General requirements ISO 10438-2 : 2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2 : Special-purpose oil systems ISO 13706 : 2011 Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers ISO 13709 Centrifugal pumps for petroleum, petrochemical and natural gas industries Note: GB/T 3215-2019 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709 : 2009, MOD) ISO 15649 Petroleum and natural gas industries - Piping ISO 16889 Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filterelement Note: GB/T18853-2015 Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element (ISO16889:2008, MOD) IEC 60034(all parts) Rotating electrical machines API RP 686 Machinery Installation and Installation Design TEMA Standards of the Tubular Exchanger Manufacturers Association NEMA MG1 Motors and Generators 3 Terms, abbreviated terms and definitions For the purposes of this document, the terms and definitions given in GB/T 42601.1-2023 apply. 4 General 4.1 Basic design 4.1.1 This document covers general-purpose oil systems. Typical datasheets for general-purpose oil systems are in Annex A. Typical piping and instrument diagrams for general-purpose oil systems are in Annex B. Typical inspector checklists for general-purpose oil systems are in Annex C. General-purpose (GP) oil systems are divided into classes and are defined by a coding system that defines the major components supplied (see Table 1). The user shall choose the applicable class and code based upon the required minimum reliability targets for the equipment train. Various API standards have supplied minimum recommended systems as indicated in Table 2 for their equipment. Annex D is supplied as a reference to provide guidance on the selection of a system.