1 Scope
This document specifies the dimensions of coated or uncoated MJ threaded self-locking inlays with small flanged metal blind holes. This document applies to aerospace MJ threads with small flanged metal blind self-locking inlays.
Note: The strength and temperature rating of self-locking inlays with small flanged metal blind holes in MJ threads is determined by the core material and sealant and is not specified in this document.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, note the date of the reference documents, only the date of the corresponding version applicable to this document; do not note the date of the reference documents, the latest version (including all the revision of the list) applicable to this document.
ISO 5855-2:1999 Aerospace-MJ threads, Part 1: Limit dimensions for bolts and nuts (Aerospace-MJ threads--Part 2: Limit dimensions for bolts and nuts)
3 Terminology and definitions
There are no terms or definitions that need to be defined in this document.
4 Structure and dimensions
The structure and dimensions of the inlays are shown in Figure 1 and Table 1.
5 Application examples
Application examples are shown in Fig. 2.
1 Scope
2 Normative references
3 Terminology and definitions
4 Structure and dimensions
5 Application examples
1范围
本文件规定了涂镀或非涂镀MJ螺纹带小凸缘金属盲孔自锁镶嵌件的尺寸。本文件适用于航空航天MJ螺纹带小凸缘金属盲孔自锁镶嵌件。
注:MJ螺纹带小凸缘金属盲孔自锁镰嵌件的强度和温度等级由夹芯材料和密封剂决定,本文件不做具体规定。
2规范性引用文件
下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中,注日期的引用文件,仅该日期对应的版本适用于本文件;不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
ISO 5855-2:1999航空航天﹑MJ螺纹﹐第⒉部分:螺栓和螺母螺纹的极限尺寸(Aerospace—MJthreads--Part 2:Limit dimensions for bolts and nuts)
3术语和定义
本文件没有需要界定的术语和定义。
4结构和尺寸
镶嵌件结构和尺寸见图1和表1。
5应用示例
应用示例见图2。
