This part of GB/T 304 specifies the general technical regulations of the spherical plain bearings for general purpose.
This part is applicable to the spherical plain bearings of which the boundary dimensions meet those specified in GB/T 9161~9164 and is used for the bearing manufacturers' production and inspection and the customers' acceptance. This part is not applicable to the spherical plain bearings for special purpose.
2 Normative References
The following normative documents contain provisions which, through reference in this part of GB/T 304, constitute provisions of this part. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 274 Rolling Bearings - Chamfer Dimension - Maximum Values (GB/T 274-2000, idt ISO 582: 1993)
GB/T 307.2 Rolling Bearings - Measuring and Gauging Principles and Methods (GB/T 307.2-2005, ISO 1132-2: 2001, Rolling Bearings - Tolerances - Part 2: Measuring and Ganging Principles and Methods, MOD)
GB/T 4199 Rolling Bearings - Tolerances - Definitions (GB/T 4199-2003, ISO 1132-1: 2000, Rolling Bearings-Tolerances - Part 1: Terms and Definitions, MOD)
GB/T 8597 Rolling Bearings-Rust Proof Packaging
GB/T 9161 Spherical Plain Bearings - Spherical Plain Bearings Rod Ends (GB/T 9161-2001, eqv ISO 12240-4: 1998)
